2022-03-31, 10:33 AM
Hi running MYBB 1.8.30
PHP 7.4.13
I keep getting emails of an error on many posts which is coming from the inc\class_parser.php (Line no. 2049)
This is the line in file
This is one one of the full emails I'm getting.
Any ideas how to sort this please?
PHP 7.4.13
I keep getting emails of an error on many posts which is coming from the inc\class_parser.php (Line no. 2049)
This is the line in file
$error_handler->error(E_USER_WARNING, $error_message, __FILE__, __LINE__, false);
This is one one of the full emails I'm getting.
Quote:Your copy of MyBB running on VXOC Astra-J/GTC (https://www.vxoc.org.uk/forum) has experienced an error. Details of the error include:
---
Type: 512
File: E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\class_parser.php (Line no. 2049)
Message
Parser output validation failed.
array (
'sourceHtmlEntities' => 'Electronic Parking Brake Control Module Programming and Setup
If the electronic parking brake control module is replaced, the following procedures must be performed:
Refer to Service Programming System (SPS) .
Calibration with Scan Tool
Note: Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.
Perform the Parking Brake Calibration procedure in Module Setup.
Calibration without Scan Tool
[TABLE="width: 98%, align: center"]',
[TR]
[TD="width: 15, align: left"]1.[/TD]
[TD]Ignition ON, apply and hold the brake pedal.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]2.[/TD]
[TD]Push and hold the electric parking brake switch down for 5-6 seconds.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]3.[/TD]
[TD]Release the electric parking brake switch.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]4.[/TD]
[TD]Momentarily push the electric parking brake switch down.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]5.[/TD]
[TD]Remove the EPB MODULE fuse and reinstall.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]6.[/TD]
[TD]Apply the electric parking brake.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]7.[/TD]
[TD]Release the electric parking brake[/TD]
[/TR]
[/TABLE]
'outputHtmlEntities' => '<span style="font-weight: bold;" class="mycode_b">Electronic Parking Brake Control Module Programming and Setup</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font">If the electronic parking brake control module is replaced, the following procedures must be performed:</span><br />
<span style="font-family: Arial;" class="mycode_font">Refer to Service Programming System (SPS) .<br />
</span><br />
<span style="font-weight: bold;" class="mycode_b">Calibration with Scan Tool</span><br />
<br />
<span style="color: brown;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="font-weight: bold;" class="mycode_b">Note: </span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="color: brown;" class="mycode_color">Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.<br />
</span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><br />
</span></span><span style="font-family: Arial;" class="mycode_font">Perform the Parking Brake Calibration procedure in Module Setup.</span><br />
<br />
<span style="font-weight: bold;" class="mycode_b">Calibration without Scan Tool</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font"><div style="text-align: left;" class="mycode_align"><table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]1.[/TD]<br />
<td class="trow1" valign="top" align="center">Ignition ON, apply and hold the brake pedal.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]2.[/TD]<br />
<td class="trow1" valign="top" align="center">Push and hold the electric parking brake switch down for 5-6 seconds.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]3.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake switch.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]4.[/TD]<br />
<td class="trow1" valign="top" align="center">Momentarily push the electric parking brake switch down.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]5.[/TD]<br />
<td class="trow1" valign="top" align="center">Remove the EPB MODULE fuse and reinstall.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]6.[/TD]<br />
<td class="trow1" valign="top" align="center">Apply the electric parking brake.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]7.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake</td>
</tr>
</table>
</div>
</span>',
'errors' =>
array (
0 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 187,
'message' => 'attributes construct error
',
'file' => '',
'line' => 14,
)),
1 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 187,
'message' => 'Couldn\'t find end of Start Tag table line 14
',
'file' => '',
'line' => 14,
)),
2 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: div line 14 and table
',
'file' => '',
'line' => 19,
)),
3 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 81,
'message' => 'attributes construct error
',
'file' => '',
'line' => 20,
)),
4 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 81,
'message' => 'Couldn\'t find end of Start Tag table line 20
',
'file' => '',
'line' => 20,
)),
5 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: span line 1 and table
',
'file' => '',
'line' => 25,
)),
6 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 81,
'message' => 'attributes construct error
',
'file' => '',
'line' => 26,
)),
7 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 81,
'message' => 'Couldn\'t find end of Start Tag table line 26
',
'file' => '',
'line' => 26,
)),
8 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: root line 0 and table
',
'file' => '',
'line' => 31,
)),
9 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 5,
'column' => 1,
'message' => 'Extra content at the end of the document
',
'file' => '',
'line' => 32,
)),
),
)
Back Trace: #0 errorHandler->email_error(512, Parser output validation failed.
array (
'sourceHtmlEntities' => 'Electronic Parking Brake Control Module Programming and Setup
If the electronic parking brake control module is replaced, the following procedures must be performed:
Refer to Service Programming System (SPS) .
Calibration with Scan Tool
Note: Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.
Perform the Parking Brake Calibration procedure in Module Setup.
Calibration without Scan Tool
[TABLE="width: 98%, align: center"]',
[TR]
[TD="width: 15, align: left"]1.[/TD]
[TD]Ignition ON, apply and hold the brake pedal.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]2.[/TD]
[TD]Push and hold the electric parking brake switch down for 5-6 seconds.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]3.[/TD]
[TD]Release the electric parking brake switch.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]4.[/TD]
[TD]Momentarily push the electric parking brake switch down.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]5.[/TD]
[TD]Remove the EPB MODULE fuse and reinstall.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]6.[/TD]
[TD]Apply the electric parking brake.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]7.[/TD]
[TD]Release the electric parking brake[/TD]
[/TR]
[/TABLE]
'outputHtmlEntities' => '<span style="font-weight: bold;" class="mycode_b">Electronic Parking Brake Control Module Programming and Setup</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font">If the electronic parking brake control module is replaced, the following procedures must be performed:</span><br />
<span style="font-family: Arial;" class="mycode_font">Refer to Service Programming System (SPS) .<br />
</span><br />
<span style="font-weight: bold;" class="mycode_b">Calibration with Scan Tool</span><br />
<br />
<span style="color: brown;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="font-weight: bold;" class="mycode_b">Note: </span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="color: brown;" class="mycode_color">Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.<br />
</span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><br />
</span></span><span style="font-family: Arial;" class="mycode_font">Perform the Parking Brake Calibration procedure in Module Setup.</span><br />
<br />
<span style="font-weight: bold;" class="mycode_b">Calibration without Scan Tool</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font"><div style="text-align: left;" class="mycode_align"><table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]1.[/TD]<br />
<td class="trow1" valign="top" align="center">Ignition ON, apply and hold the brake pedal.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]2.[/TD]<br />
<td class="trow1" valign="top" align="center">Push and hold the electric parking brake switch down for 5-6 seconds.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]3.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake switch.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]4.[/TD]<br />
<td class="trow1" valign="top" align="center">Momentarily push the electric parking brake switch down.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]5.[/TD]<br />
<td class="trow1" valign="top" align="center">Remove the EPB MODULE fuse and reinstall.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]6.[/TD]<br />
<td class="trow1" valign="top" align="center">Apply the electric parking brake.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]7.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake</td>
</tr>
</table>
</div>
</span>',
'errors' =>
array (
0 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 187,
'message' => 'attributes construct error
',
'file' => '',
'line' => 14,
)),
1 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 187,
'message' => 'Couldn\'t find end of Start Tag table line 14
',
'file' => '',
'line' => 14,
)),
2 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: div line 14 and table
',
'file' => '',
'line' => 19,
)),
3 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 81,
'message' => 'attributes construct error
',
'file' => '',
'line' => 20,
)),
4 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 81,
'message' => 'Couldn\'t find end of Start Tag table line 20
',
'file' => '',
'line' => 20,
)),
5 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: span line 1 and table
',
'file' => '',
'line' => 25,
)),
6 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 81,
'message' => 'attributes construct error
',
'file' => '',
'line' => 26,
)),
7 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 81,
'message' => 'Couldn\'t find end of Start Tag table line 26
',
'file' => '',
'line' => 26,
)),
8 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: root line 0 and table
',
'file' => '',
'line' => 31,
)),
9 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 5,
'column' => 1,
'message' => 'Extra content at the end of the document
',
'file' => '',
'line' => 32,
)),
),
), E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\class_parser.php, 2049) called at [E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\class_error.php:229]
#1 errorHandler->error(512, Parser output validation failed.
array (
'sourceHtmlEntities' => 'Electronic Parking Brake Control Module Programming and Setup
If the electronic parking brake control module is replaced, the following procedures must be performed:
Refer to Service Programming System (SPS) .
Calibration with Scan Tool
Note: Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.
Perform the Parking Brake Calibration procedure in Module Setup.
Calibration without Scan Tool
[TABLE="width: 98%, align: center"]',
[TR]
[TD="width: 15, align: left"]1.[/TD]
[TD]Ignition ON, apply and hold the brake pedal.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]2.[/TD]
[TD]Push and hold the electric parking brake switch down for 5-6 seconds.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]3.[/TD]
[TD]Release the electric parking brake switch.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]4.[/TD]
[TD]Momentarily push the electric parking brake switch down.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]5.[/TD]
[TD]Remove the EPB MODULE fuse and reinstall.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]6.[/TD]
[TD]Apply the electric parking brake.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]7.[/TD]
[TD]Release the electric parking brake[/TD]
[/TR]
[/TABLE]
'outputHtmlEntities' => '<span style="font-weight: bold;" class="mycode_b">Electronic Parking Brake Control Module Programming and Setup</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font">If the electronic parking brake control module is replaced, the following procedures must be performed:</span><br />
<span style="font-family: Arial;" class="mycode_font">Refer to Service Programming System (SPS) .<br />
</span><br />
<span style="font-weight: bold;" class="mycode_b">Calibration with Scan Tool</span><br />
<br />
<span style="color: brown;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="font-weight: bold;" class="mycode_b">Note: </span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="color: brown;" class="mycode_color">Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.<br />
</span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><br />
</span></span><span style="font-family: Arial;" class="mycode_font">Perform the Parking Brake Calibration procedure in Module Setup.</span><br />
<br />
<span style="font-weight: bold;" class="mycode_b">Calibration without Scan Tool</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font"><div style="text-align: left;" class="mycode_align"><table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]1.[/TD]<br />
<td class="trow1" valign="top" align="center">Ignition ON, apply and hold the brake pedal.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]2.[/TD]<br />
<td class="trow1" valign="top" align="center">Push and hold the electric parking brake switch down for 5-6 seconds.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]3.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake switch.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]4.[/TD]<br />
<td class="trow1" valign="top" align="center">Momentarily push the electric parking brake switch down.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]5.[/TD]<br />
<td class="trow1" valign="top" align="center">Remove the EPB MODULE fuse and reinstall.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]6.[/TD]<br />
<td class="trow1" valign="top" align="center">Apply the electric parking brake.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]7.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake</td>
</tr>
</table>
</div>
</span>',
'errors' =>
array (
0 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 187,
'message' => 'attributes construct error
',
'file' => '',
'line' => 14,
)),
1 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 187,
'message' => 'Couldn\'t find end of Start Tag table line 14
',
'file' => '',
'line' => 14,
)),
2 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: div line 14 and table
',
'file' => '',
'line' => 19,
)),
3 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 81,
'message' => 'attributes construct error
',
'file' => '',
'line' => 20,
)),
4 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 81,
'message' => 'Couldn\'t find end of Start Tag table line 20
',
'file' => '',
'line' => 20,
)),
5 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: span line 1 and table
',
'file' => '',
'line' => 25,
)),
6 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 65,
'column' => 81,
'message' => 'attributes construct error
',
'file' => '',
'line' => 26,
)),
7 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 73,
'column' => 81,
'message' => 'Couldn\'t find end of Start Tag table line 26
',
'file' => '',
'line' => 26,
)),
8 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 76,
'column' => 9,
'message' => 'Opening and ending tag mismatch: root line 0 and table
',
'file' => '',
'line' => 31,
)),
9 =>
LibXMLError::__set_state(array(
'level' => 3,
'code' => 5,
'column' => 1,
'message' => 'Extra content at the end of the document
',
'file' => '',
'line' => 32,
)),
),
), E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\class_parser.php, 2049, ) called at [E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\class_parser.php:2049]
#2 postParser->validate_output(Electronic Parking Brake Control Module Programming and Setup
If the electronic parking brake control module is replaced, the following procedures must be performed:
Refer to Service Programming System (SPS) .
Calibration with Scan Tool
Note: Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.
Perform the Parking Brake Calibration procedure in Module Setup.
Calibration without Scan Tool
[TABLE="width: 98%, align: center"], <span style="font-weight: bold;" class="mycode_b">Electronic Parking Brake Control Module Programming and Setup</span><br />
[TR]
[TD="width: 15, align: left"]1.[/TD]
[TD]Ignition ON, apply and hold the brake pedal.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]2.[/TD]
[TD]Push and hold the electric parking brake switch down for 5-6 seconds.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]3.[/TD]
[TD]Release the electric parking brake switch.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]4.[/TD]
[TD]Momentarily push the electric parking brake switch down.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]5.[/TD]
[TD]Remove the EPB MODULE fuse and reinstall.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]6.[/TD]
[TD]Apply the electric parking brake.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]7.[/TD]
[TD]Release the electric parking brake[/TD]
[/TR]
[/TABLE]
<br />
<span style="font-family: Arial;" class="mycode_font">If the electronic parking brake control module is replaced, the following procedures must be performed:</span><br />
<span style="font-family: Arial;" class="mycode_font">Refer to Service Programming System (SPS) .<br />
</span><br />
<span style="font-weight: bold;" class="mycode_b">Calibration with Scan Tool</span><br />
<br />
<span style="color: brown;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="font-weight: bold;" class="mycode_b">Note: </span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="color: brown;" class="mycode_color">Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.<br />
</span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><br />
</span></span><span style="font-family: Arial;" class="mycode_font">Perform the Parking Brake Calibration procedure in Module Setup.</span><br />
<br />
<span style="font-weight: bold;" class="mycode_b">Calibration without Scan Tool</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font"><div style="text-align: left;" class="mycode_align"><table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]1.[/TD]<br />
<td class="trow1" valign="top" align="center">Ignition ON, apply and hold the brake pedal.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]2.[/TD]<br />
<td class="trow1" valign="top" align="center">Push and hold the electric parking brake switch down for 5-6 seconds.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]3.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake switch.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]4.[/TD]<br />
<td class="trow1" valign="top" align="center">Momentarily push the electric parking brake switch down.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]5.[/TD]<br />
<td class="trow1" valign="top" align="center">Remove the EPB MODULE fuse and reinstall.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]6.[/TD]<br />
<td class="trow1" valign="top" align="center">Apply the electric parking brake.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]7.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake</td>
</tr>
</table>
</div>
</span>) called at [E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\class_parser.php:1990]
#3 postParser->output_allowed(Electronic Parking Brake Control Module Programming and Setup
If the electronic parking brake control module is replaced, the following procedures must be performed:
Refer to Service Programming System (SPS) .
Calibration with Scan Tool
Note: Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.
Perform the Parking Brake Calibration procedure in Module Setup.
Calibration without Scan Tool
[TABLE="width: 98%, align: center"], <span style="font-weight: bold;" class="mycode_b">Electronic Parking Brake Control Module Programming and Setup</span><br />
[TR]
[TD="width: 15, align: left"]1.[/TD]
[TD]Ignition ON, apply and hold the brake pedal.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]2.[/TD]
[TD]Push and hold the electric parking brake switch down for 5-6 seconds.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]3.[/TD]
[TD]Release the electric parking brake switch.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]4.[/TD]
[TD]Momentarily push the electric parking brake switch down.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]5.[/TD]
[TD]Remove the EPB MODULE fuse and reinstall.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]6.[/TD]
[TD]Apply the electric parking brake.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]7.[/TD]
[TD]Release the electric parking brake[/TD]
[/TR]
[/TABLE]
<br />
<span style="font-family: Arial;" class="mycode_font">If the electronic parking brake control module is replaced, the following procedures must be performed:</span><br />
<span style="font-family: Arial;" class="mycode_font">Refer to Service Programming System (SPS) .<br />
</span><br />
<span style="font-weight: bold;" class="mycode_b">Calibration with Scan Tool</span><br />
<br />
<span style="color: brown;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="font-weight: bold;" class="mycode_b">Note: </span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="color: brown;" class="mycode_color">Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.<br />
</span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><br />
</span></span><span style="font-family: Arial;" class="mycode_font">Perform the Parking Brake Calibration procedure in Module Setup.</span><br />
<br />
<span style="font-weight: bold;" class="mycode_b">Calibration without Scan Tool</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font"><div style="text-align: left;" class="mycode_align"><table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]1.[/TD]<br />
<td class="trow1" valign="top" align="center">Ignition ON, apply and hold the brake pedal.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]2.[/TD]<br />
<td class="trow1" valign="top" align="center">Push and hold the electric parking brake switch down for 5-6 seconds.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]3.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake switch.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]4.[/TD]<br />
<td class="trow1" valign="top" align="center">Momentarily push the electric parking brake switch down.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]5.[/TD]<br />
<td class="trow1" valign="top" align="center">Remove the EPB MODULE fuse and reinstall.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]6.[/TD]<br />
<td class="trow1" valign="top" align="center">Apply the electric parking brake.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]7.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake</td>
</tr>
</table>
</div>
</span>) called at [E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\class_parser.php:284]
#4 postParser->parse_message(<span style="font-weight: bold;" class="mycode_b">Electronic Parking Brake Control Module Programming and Setup</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font">If the electronic parking brake control module is replaced, the following procedures must be performed:</span><br />
<span style="font-family: Arial;" class="mycode_font">Refer to Service Programming System (SPS) .<br />
</span><br />
<span style="font-weight: bold;" class="mycode_b">Calibration with Scan Tool</span><br />
<br />
<span style="color: brown;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="font-weight: bold;" class="mycode_b">Note: </span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><span style="color: brown;" class="mycode_color">Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.<br />
</span></span></span><span style="color: #000000;" class="mycode_color"><span style="font-family: Arial;" class="mycode_font"><br />
</span></span><span style="font-family: Arial;" class="mycode_font">Perform the Parking Brake Calibration procedure in Module Setup.</span><br />
<br />
<span style="font-weight: bold;" class="mycode_b">Calibration without Scan Tool</span><br />
<br />
<span style="font-family: Arial;" class="mycode_font"><div style="text-align: left;" class="mycode_align"><table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]1.[/TD]<br />
<td class="trow1" valign="top" align="center">Ignition ON, apply and hold the brake pedal.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]2.[/TD]<br />
<td class="trow1" valign="top" align="center">Push and hold the electric parking brake switch down for 5-6 seconds.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]3.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake switch.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]4.[/TD]<br />
<td class="trow1" valign="top" align="center">Momentarily push the electric parking brake switch down.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]5.[/TD]<br />
<td class="trow1" valign="top" align="center">Remove the EPB MODULE fuse and reinstall.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]6.[/TD]<br />
<td class="trow1" valign="top" align="center">Apply the electric parking brake.</td>
</tr>
</table>
<table border="0" cellspacing="1" cellpadding="3" class="tborder" style="width:"width: 98%, align: center"%;">
<tr>
[TD="width: 15, align: left"]7.[/TD]<br />
<td class="trow1" valign="top" align="center">Release the electric parking brake</td>
</tr>
</table>
</div>
</span>, Array ([allow_html] => 0,[allow_mycode] => 1,[allow_smilies] => 1,[allow_imgcode] => 1,[allow_videocode] => 1,[filter_badwords] => 1,[me_username] => Rusty2009)) called at [E:\inetpub\wwwroot\vxoc.org.uk\html\forum\inc\functions_post.php:817]
#5 build_postbit(Array ([uid] => 1,[username] => Rusty2009,[password] => 1532d39851c630d51add7e4bc3de5282,[salt] => 1xeO4qtX,[loginkey] => RP1G8yG96rEjBADKQX6CWFyk0LamGBwt0RdYUTCRYEgRnFfE3s,[email] => [email protected],[postnum] => 8,882,[threadnum] => 357,[avatar] => ./uploads/avatars/avatar_1.jpg?dateline=1427817674,[avatardimensions] => 100|67,[avatartype] => upload,[usergroup] => 4,[additionalgroups] => 9,[displaygroup] => 4,[usertitle] => Administrator,[regdate] => 1427798000,[lastactive] => 1648719965,[lastvisit] => 1648676870,[lastpost] => 1648369955,[website] => http://www.vxoc.org.uk,[icq] => 0,[skype] => ,[google] => ,[birthday] => 8-6-1984,[birthdayprivacy] => none,[signature] =>
Astra-J 2.0 CDTI S/SRetrofitted AFL, TPMS, Navi950, BT, DAB, Rear Camera, Infinity sound system, Towbar, Flexfloor & more.I can do programming and retrofits using genuine GM MDI and Dealer software.,[allownotices] => 1,[hideemail] => 1,[subscriptionmethod] => 2,[invisible] => 0,[receivepms] => 1,[receivefrombuddy] => 0,[pmnotice] => 2,[pmnotify] => 1,[buddyrequestspm] => 0,[buddyrequestsauto] => 0,[threadmode] => linear,[showimages] => 1,[showvideos] => 1,[showsigs] => 1,[showavatars] => 1,[showquickreply] => 1,[showredirect] => 1,[ppp] => 0,[tpp] => 0,[daysprune] => 0,[dateformat] => 5,[timeformat] => 1,[timezone] => 0,[dst] => 1,[dstcorrection] => 2,[buddylist] => 258,18,2,268,39,402,423,394,718,1237,2099,3457,[ignorelist] => ,[style] => 2,[away] => 0,[awaydate] => 0,[returndate] => 0,[awayreason] => ,[pmfolders] => 0**$%%$1**$%%$2**$%%$3**$%%$4**,[notepad] => ,[referrer] => 0,[referrals] => 47,[reputation] => 64,[regip] => m��h,[lastip] => �� ,[language] => ,[timeonline] => 7219079,[showcodebuttons] => 1,[totalpms] => 1568,[unreadpms] => 44,[warningpoints] => 0,[moderateposts] => 0,[moderationtime] => 0,[suspendposting] => 0,[suspensiontime] => 0,[suspendsignature] => 0,[suspendsigtime] => 0,[coppauser] => 0,[classicpostbit] => 0,[loginattempts] => 1,[usernotes] => ,[sourceeditor] => 0,[passwordconvert] => ,[passwordconverttype] => ,[passwordconvertsalt] => ,[lastmark] => 1427798000,[loginlockoutexpiry] => 0,[myalerts_disabled_alert_types] => ,[autoresponder] => 0,[autorespondertext] => ,[autorespondertitle] => ,[autoresponderbanned] => 0,[profilepic] => ,[profilepicdimensions] => ,[profilepictype] => ,[profilepicdescription] => ,[show_profile_visitors] => 1,[tyl_unumtyls] => 0,[tyl_unumrcvtyls] => 0,[tyl_unumptyls] => 0,[tyl_lastadddeldate] => 0,[userusername] => Rusty2009,[pid] => 4410,[tid] => 312,[replyto] => 0,[fid] => 22,[subject] => Epb orange light,[icon] => 0,[dateline] => 1398838749,[message] => Electronic Parking Brake Control Module Programming and Setup
If the electronic parking brake control module is replaced, the following procedures must be performed:
Refer to Service Programming System (SPS) .
Calibration with Scan Tool
Note: Verify the rear brakes are clear of any obstacles before starting the calibration procedure. During the procedure the rear brakes will cycle several times, stay clear of all moving parts until the process is complete.
Perform the Parking Brake Calibration procedure in Module Setup.
Calibration without Scan Tool
[TABLE="width: 98%, align: center"],[ipaddress] => ���K,[includesig] => 1,[smilieoff] => 0,[edituid] => 0,[edittime] => 0,[editreason] => ,[visible] => 1,[tyl_pnumtyls] => 0,[tyl_last_alerted_tyl_id] => 0,[ufid] => 1,[fid1] => Bournemouth, Dorset,[fid3] => Male,[fid4] => Astra-J 2.0CDTI S/S 165ps,[reporters] => ,[editusername] => ,[aid] => ,[pmid] => ,[posturl] =>
[TR]
[TD="width: 15, align: left"]1.[/TD]
[TD]Ignition ON, apply and hold the brake pedal.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]2.[/TD]
[TD]Push and hold the electric parking brake switch down for 5-6 seconds.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]3.[/TD]
[TD]Release the electric parking brake switch.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]4.[/TD]
[TD]Momentarily push the electric parking brake switch down.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]5.[/TD]
[TD]Remove the EPB MODULE fuse and reinstall.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]6.[/TD]
[TD]Apply the electric parking brake.[/TD]
[/TR]
[/TABLE]
[TABLE="width: 98%, align: center"]
[TR]
[TD="width: 15, align: left"]7.[/TD]
[TD]Release the electric parking brake[/TD]
[/TR]
[/TABLE]
<div class="float_right" style="vertical-align: top">
<!-- IS_UNREAD --><strong><a href="showthread.php?tid=312&pid=4410#pid4410" title="Epb orange light">#25</a></strong>
</div>
,[button_multiquote] => ,[subject_extra] => ,[attachments] => ,[button_rep] => ,[button_warn] => ,[button_purgespammer] => ,[button_pm] => ,[button_reply_pm] => ,[button_replyall_pm] => ,[button_forward_pm] => ,[button_delete_pm] => ,[replink] =>
<br />Reputation:
<a href="reputation.php?uid=1"><strong class="reputation_positive">64</strong></a>
,[warninglevel] => ,[postdate] => 30:th-Apr-2014, 07:19:09,[author] => 1,[subject_title] => Epb orange light,[groupimage] => ,[profilelink_plain] => member.php?action=profile&uid=1,[username_formatted] => <span style="color: #65b2e9;"><strong><em>Rusty2009</em></strong></span>,[profilelink] => <a data-uid='1' href="https://www.vxoc.org.uk/forum/member.php?action=profile&uid=1"><span style="color: #65b2e9;"><strong><em>Rusty2009</em></strong></span></a>,[stars] => 7,[starimage] => images/star.png,[userstars] => <img src="images/star.png" border="0" alt="*" /><img src="images/star.png" border="0" alt="*" /><img src="images/star.png" border="0" alt="*" /><img src="images/star.png" border="0" alt="*" /><img src="images/star.png" border="0" alt="*" /><img src="images/star.png" border="0" alt="*" /><img src="images/star.png" border="0" alt="*" /><br />,[onlinestatus] =>
<a href="online.php" title="Online"><img src="https://www.vxoc.org.uk/forum/images/dark1.8/buddy_online.png" border="0" alt="Online" class="buddy_status" /></a>
,[useravatar] =>
<div class="author_avatar"><a href="member.php?action=profile&uid=1"><img src="https://www.vxoc.org.uk/forum/uploads/avatars/avatar_1.jpg?dateline=1427817674" alt="" width="55" height="37" /></a></div>
,[button_find] => ,[button_www] =>
<a href="http://www.vxoc.org.uk" target="_blank" rel="noopener" title="Visit this user's website" class="postbit_website"><span>Website</span></a>
,[button_email] => ,[userregdate] => 31 Mar 2015,[userreputation] =>
<a href="reputation.php?uid=1"><strong class="reputation_positive">64</strong></a>
,[profilefield] =>
<br />Car: Astra-J 2.0CDTI S/S 165ps
<br />Location: Bournemouth, Dorset
<br />Sex: Male
,[fieldvalue] => Male,[fieldname] => Sex,[user_details] =>
Posts: 8,882<br />
Threads: 357<br />
%%TYL_NUMTHANKEDLIKED%%<br />
Joined: 31 Mar 2015
<br />Reputation:
<a href="reputation.php?uid=1"><strong class="reputation_positive">64</strong></a>
<br />Car: Astra-J 2.0CDTI S/S 165ps
<br />Location: Bournemouth, Dorset
<br />Sex: Male
,[input_editreason] => ,[button_edit] => ,[button_quickdelete] => ,[button_quickrestore] => ,[button_quote] =>
<a href="newreply.php?tid=312&replyto=4410" title="Quote this message in a reply" class="postbit_quote postbit_mirage"><span>Reply</span></a>
,[button_quickquote] => ,[button_report] => ,[editedmsg] => ,[inlinecheck] => ,[postlink] => showthread.php?tid=312&pid=4410,[iplogged] => ,[poststatus] => )) called at [E:\inetpub\wwwroot\vxoc.org.uk\html\forum\showthread.php:1118]
Any ideas how to sort this please?